滑杆式旋转阀/卸料阀/星型卸料器/旋转给料器主要结构：外壳金属;物料接触部分：内衬陶瓷、尼龙、四氟、特氟龙、钛合金、铝合金、不锈钢。　　滑杆式旋转阀主要用于输送锂电池正极材料、磷酸铁锂、三元材料、化工、食品、制药、塑料等。　　滑杆式旋转阀特点：物料粘接设备，可以快速清理，快速复位。　　稳定性优于其他开拆式阀门，可原地抽出转子。　　清洗前的拆卸：松开螺栓手柄，沿导柱将端盖轻轻拉至极限，抽出叶轮，双手握住叶轮两端抽颈取出。清洗后，装入叶轮(转动叶轮使花键齿合)，推入端盖(转动活动轴柄使花键齿合)，拧紧螺栓手柄。　　驱动方式：链驱动/马达直连驱动。　　动力配置：摆线针轮减速机，Y系列电机(可按客户指定动力配置)【电话/微信咨询：耿先森18706122402】        内衬陶瓷旋转阀具有平滑的表面和优异的耐腐蚀性，不会吸附有害物质和细菌。可以保持储存和传输介质的洁净，提高生产质量和安全性。陶瓷内衬具有优异的电绝缘性和高硬度，可以提高旋转阀的性能和稳定性，并减少旋转卸料阀的磨损和损坏。陶瓷内衬还可以起到防爆的作用。由于陶瓷内衬具有较高的抗压强度和耐冲击性，它可以有效地抵御爆炸或高压气体产生的冲击和破坏。　　常州彤奇机械有限公司拥有多年的研发生产/定制卸料阀旋转阀的经验，秉承质量第 一、用户至 上的原则。我们的旋转阀能够处理锂电池、钢厂、电厂、水泥、矿山、环保、塑料、化工、食品和医药等行业的各种颗粒、片状、块状物料、粘料、粉料、超微粉体等。【电话/微信咨询：耿先森 18706122402】        《扫二维码-添加 耿先森 微信-咨询滑杆式陶瓷旋转阀》　　Sliding rod rotary valve/discharge valve/star shaped unloader/rotary feeder Main structure: metal shell; Material contact parts: lined with ceramic, nylon, PTFE, PTFE, titanium alloy, aluminum alloy, stainless steel.　　Sliding rod rotary valves are mainly used for transporting lithium battery cathode materials, lithium iron phosphate, ternary materials, chemical, food, pharmaceutical, plastic, etc.　　Features of sliding rod rotary valve: Material bonding equipment, can be quickly cleaned and reset.　　Stability is superior to other detachable valves, and the rotor can be pulled out in place.　　Disassembly before cleaning: Loosen the bolt handle, gently pull the end cover along the guide column to the limit, extract the impeller, and hold both ends of the impeller with both hands to remove the neck. After cleaning, install the impeller (rotate the impeller to engage the spline teeth), push in the end cover (rotate the movable shaft handle to engage the spline teeth), and tighten the bolt handle.　　Drive mode: chain drive/direct motor drive.　　Power configuration: Cycloid pinwheel reducer, Y series motor (can be configured according to customer’s specified power)